|
Service
Feature: Custom Electronics Wiring |
elRayo Guitarworks can rewire the pots, switches,
output jacks and pickups in your electronics. Perhaps you want to
experiment with values to change the response of a tone control,
add a push/pull switch to add extra pickup selections, or just clean
up the existing wiring in your guitar. Many of these services are
included with the standard setup, while some electronics require
extra planning and attention. Regardless, the level of detail applied
is readily apparent. For more information regarding electronics
rewiring, email us. |
The original electronics-functional but messy.
|
Notice the electric tape to hold wires in place.
|
Underneath the electronics was a layer of tin foil meant
to shield the cavity from RF interference.
|
The rewired pickguard, using copper shielding tape, much
cleaner and better than the tin foil.
|
Notice the shorter and cleaner wiring.
|
All back together and sounding good.
|
|
Reworking the electronics in your guitar serves multiple functions.
First, a cleaner layout means the guitar will reassemble easier,
no wires that cause buldges or irregularities in the pickguard.
Secondly, shorter cloth wiring provides a tonal benefit. Less wiring
means less resistance. This mid 80's Flying V turned out great,
let us do the same for your favorite electrics. |
|
