Many problems with tuning instability can be corrected by adopting some slight changes to your restringing technique. By following these tips, you can eliminate some of the causes of tuning instability.

If you are a novice to restringing, we suggest that you do not remove all of the strings at once, rather replace each string one at a time to insure no bridge parts become dislodged in the process.

Begin by determining the type of bridge. Each style of guitar, be it acoustic or electric has a unique bridge that requires a slightly different restringing method. To the left are 6 examples of different bridge types. There are other styles of bridges available, so if yours does not match the following examples, examine the current setup and the proceed here.

Before you begin replacing the strings, make sure you are using a set similar to that which is already on the guitar. Different gauges (thicknesses) may require further adjustments to perform correctly. In addition, different types of strings (acoustic steel strings, nylon classical strings, nickel wound electric strings) may result in less than optimal performance, or in the worst case, severe damage to the instrument. If you are unsure of the strings used, check with elRayo Guitarworks before proceeding.

Removing the strings:

Begin by detuning the string, and then slowly removing the string from the tuning post. Rushing the process could result in damage to the headstock. DO NOT cut the string while under tension, the amount of tension could shoot the string away from the guitar and cause injury